Eastwood Hydraulic Tube Benders

There are three ways into hydraulic tube bending with Eastwood, and they all end at the same place — ram pressure making the bend instead of your arms. The Electric Hydraulic Tubing Bender (22199) is the complete machine: a 1-hp electric pump on its own rolling dolly, ready to bend up to 2" tube out of the box. The Air-Hydraulic High Capacity Tube Bender Combo arrives as a full station — bender, air-hydraulic conversion, and rolling stand bought together. And if you already own the manual Eastwood High Capacity Tube Bender, the air-hydraulic and electro-hydraulic conversion kits here upgrade the bender you have rather than replacing it.

The choice that matters is where the ram pressure comes from. Air-hydraulic runs off your shop compressor — 90 psi of air becomes 1,450 psi at the ram, no electrical hookup. Electric-hydraulic runs off a standard wall outlet instead, with no compressor to keep up, and cycles the ram up to 3× quicker — the pick for repeat bends and shops without air on tap. Whichever drive you choose, capacity is set by the bender and dies, not the pump, so both routes bend the same 2" OD tube to a full 180°.

These are the hydraulic options within Eastwood's range — for hydraulic benders across all our brands, see the full hydraulic tube & pipe benders collection. Not sure whether air or electric fits your shop? Call us on (855) 605-4599 and we'll talk it through.